Adaptor: ABS, Pins: Golden plated brass pins, Connector house: ABS
Single notch, 2pins. Use for Creative patient monitor: PC- 1000, 5000, 9000, UP-6000 PAG/PLG , Redel compatible plastic medical connectors 2 pin Male and female
Advantage:
Plastic housing made of PSU, light weight
Tail nuts and socket round nuts are color-coded to prevent mis-insertion
Multiple colors to choose from (gray, blue, yellow, black, red, green and white) Positioning device: Double reed lock, keyway to prevent rotation
Mechanical life: 3000-5000 cycles
Waterproof IP rating: IP50
Salt spray corrosion test: >48h
Ruggedness: Suitable for use under high vibration and strong impact conditions.
Assembly method:
1. Pass the cable through the tail nut①and the cable clamp②. Solder to the corresponding position of the insulator assembly③.
2. Install the cable clamp②to the welded insulator assembly③. Note that the protrusion of the cable clamp②corresponds to the groove of the insulator③.
3. Insert the insulator assembly③into the plug assembly④, noting that the protrusions on the cable②are to fit in the recesses in the plug assembly④.
4. Install the tail nut 1 into the plug assembly④and tighten the tail nut.
